8 Common Problems with Double Eccentric Butterfly Valves and Their Solutions

News
Oct 31, 2026

Double eccentric butterfly valves play an important role in industrial pipeline systems. They are widely used in water supply, wastewater treatment, power generation, chemical processing, and other industrial applications.

Compared with concentric butterfly valves, double eccentric butterfly valves feature two offset axes. This design reduces friction between the disc and seat during opening and closing. It also helps minimize seat wear and improve sealing performance.

However, like other industrial valves, double eccentric butterfly valves can still develop problems during operation. Internal leakage, difficult operation, seat damage, and actuator failure are some common issues users may encounter.

Understanding these problems helps users identify their causes, reduce maintenance costs, and extend valve service life.

In this article, we will discuss eight common problems with double eccentric butterfly valves, explain their possible causes, and provide practical solutions.

1. Internal Leakage When the Valve Is Fully Closed

Internal leakage is one of the most common problems with double eccentric butterfly valves.

When the valve is fully closed, some fluid may still pass through it. This problem can affect pipeline isolation and reduce system efficiency.

Possible Causes:

  • The valve seat is worn, scratched, or damaged.
  • Dirt, sand, or other particles become trapped between the disc and seat.
  • The disc does not reach the correct closing position.
  • The seat material is unsuitable for the operating temperature or medium.
  • The actuator does not provide sufficient closing torque.

How to Solve It:

First, inspect the sealing surfaces of the disc and seat. Remove any dirt or foreign particles. If the seat has cracks, deformation, or severe wear, replace it.

Also, check the actuator and closing position. Make sure the valve reaches its designed fully closed position.

To prevent this problem, select suitable seat materials based on the medium, pressure, and temperature. Regularly inspect the sealing components, especially in pipelines that carry abrasive or contaminated fluids.

Butterfly valve damaged by build-up of sediment and debris

Butterfly valve damaged by build-up of sediment and debris

2. The Valve Becomes Difficult to Open or Close

Some users find that their butterfly valves become harder to operate after a period of service.

In some cases, manual operation requires more force. In other cases, an electric actuator may trigger an overload alarm or fail to complete the opening or closing process.

Possible Causes:

  • Foreign particles accumulate inside the valve.
  • The valve stem or bearings become worn or corroded.
  • The gearbox lacks proper lubrication.
  • The disc and seat experience abnormal friction.
  • The actual operating torque exceeds the actuator’s output capacity.

How to Solve It:

Inspect the valve’s internal components and remove any foreign particles. Check the stem, bearings, and gearbox for damage or abnormal wear.

If the valve uses an electric or pneumatic actuator, check whether its output torque meets the valve’s operating requirements.

Proper valve selection is important. Users should consider the working pressure, differential pressure, medium, and operating frequency when selecting an actuator.

3. Valve Seat Wear and Shortened Service Life

The valve seat plays an important role in the sealing performance of a double eccentric butterfly valve.

After long-term operation, the seat may show signs of wear, cracking, deformation, or aging. These problems can reduce sealing performance and eventually cause internal leakage.

Possible Causes:

  • The medium contains sand, mineral particles, or other abrasive materials.
  • The operating temperature exceeds the suitable range of the seat material.
  • The seat material is incompatible with the medium.
  • Frequent opening and closing increases the mechanical load on the sealing components.
  • The valve operates under unsuitable throttling conditions.

How to Solve It:

Select the correct seat material according to the actual working conditions.

Common seat materials include EPDM, NBR, PTFE, and other materials designed for specific applications. Each material has different temperature limits, chemical resistance, and mechanical properties.

For example, EPDM is commonly used in water applications, while NBR may be suitable for certain oil-related applications. PTFE offers good chemical resistance in many applications.

However, users should always check the manufacturer’s material compatibility recommendations before selecting a seat material.

Regular inspections also help identify early signs of seat damage and prevent unexpected leakage.

Double offset butterfly valve seal ring damage

Double offset butterfly valve seal ring damage

4. Corrosion or Erosion of the Valve Disc

The valve disc comes into direct contact with the flowing medium. Therefore, corrosion and erosion can damage its surface and affect sealing performance.

This problem is particularly important in chemical processing, mining, and wastewater treatment applications.

Possible Causes:

  • The medium contains corrosive chemicals.
  • High fluid velocity causes surface erosion.
  • Solid particles continuously impact the disc surface.
  • The disc material is unsuitable for the working conditions.
  • The protective coating becomes damaged or worn.

How to Solve It:

Choose suitable disc materials according to the medium and operating environment.

For corrosive applications, users should consider corrosion-resistant materials or appropriate surface treatments.

For abrasive applications, the disc material and surface protection require special attention.

Regularly inspect the disc, especially its sealing edge. If the surface shows severe corrosion, pitting, or erosion, repair or replacement may be necessary.

5. Valve Stem or Bearing Failure

The valve stem transfers operating torque from the actuator or gearbox to the disc. Bearings support the stem and allow it to rotate smoothly.

If these components fail, the valve may become difficult to operate or lose its ability to open and close correctly.

Possible Causes:

  • The stem becomes corroded or deformed.
  • Bearings experience long-term wear.
  • Excessive operating torque damages internal components.
  • Improper installation creates additional mechanical stress.
  • Poor maintenance allows dirt or moisture to enter the bearing area.

How to Solve It:

Inspect the stem and bearings for corrosion, wear, and deformation.

Replace damaged components when necessary. Also, check the alignment between the valve, gearbox, and actuator.

During installation, make sure the pipeline does not place excessive external stress on the valve body.

Proper installation and regular maintenance can help prevent premature stem and bearing failure.

Double offset butterfly valve sealing surface and stem issues

Double offset butterfly valve sealing surface and stem issues

6. Leakage Around the Valve Stem

Internal leakage occurs when fluid passes through a closed valve. External leakage around the stem is a different problem.

Users may notice water, oil, or other media leaking from the area where the stem passes through the valve body.

Possible Causes:

  • O-rings or stem seals become worn.
  • Sealing materials age or lose elasticity.
  • The stem surface becomes scratched or damaged.
  • The packing gland becomes loose in valves with packing-type stem seals.
  • The sealing components are unsuitable for the operating temperature or pressure.

How to Solve It:

First, identify the source of the leakage. Inspect the stem sealing components and check the stem surface.

Replace damaged O-rings, packing, or other sealing components according to the valve design.

If the valve uses adjustable packing, follow the manufacturer’s maintenance instructions. Do not overtighten the packing, as excessive compression can increase stem friction and operating torque.

Always isolate and depressurize the pipeline before carrying out maintenance.

7. Actuator Failure

Many double eccentric butterfly valves use electric, pneumatic, or hydraulic actuators for automatic operation.

When the actuator fails, the valve may not open or close correctly. This can interrupt the normal operation of the entire pipeline system.

Possible Causes:

  • The actuator output torque is insufficient.
  • The power supply or control signal is unstable.
  • The pneumatic supply pressure is too low.
  • The travel limit settings are incorrect.
  • Internal actuator components are damaged.
  • The valve requires more operating torque than expected.

How to Solve It:

Start by checking the actuator.

For electric actuators, inspect the power supply, wiring, control signals, and overload protection settings.

For pneumatic actuators, check the air supply pressure, air lines, and solenoid valve.

Also, verify that the actuator’s output torque meets the valve’s actual operating requirements.

When selecting an actuator, do not consider only the valve diameter. Operating pressure, differential pressure, seat design, medium, and an appropriate safety factor also affect the required torque.

Correct actuator selection helps ensure reliable valve operation.

8. Abnormal Noise and Vibration During Operation

Some users may notice unusual noise or vibration when a double eccentric butterfly valve operates.

These problems can affect pipeline stability and may accelerate wear on internal components.

Possible Causes:

  • The fluid velocity is too high.
  • The valve operates at an unsuitable opening position.
  • Excessive differential pressure causes unstable flow.
  • Cavitation occurs under certain operating conditions.
  • The valve size or installation position is unsuitable.
  • The pipeline system has insufficient support.

How to Solve It:

Check the actual flow rate, pressure, and valve opening position.

If the valve operates under a high differential pressure, evaluate whether cavitation or excessive fluid velocity is causing the problem.

Also, inspect the pipeline supports and valve installation. Make sure the valve is suitable for the system’s flow requirements.

For applications that require continuous flow regulation, select a valve designed for throttling service rather than assuming that every butterfly valve can operate effectively at all partial-opening positions.

High Performance Double Offset Butterfly Valve Manufactured by WESDUN/WESDOM

High Performance Double Offset Butterfly Valve Manufactured by WESDUN

How to Prevent Common Problems with Double Eccentric Butterfly Valves

Although some problems are unavoidable after long-term operation, proper selection, installation, and maintenance can significantly reduce the risk of failure.

Here are five important points to consider.

1. Choose the Right Valve Materials

Different working conditions require different materials.

Consider the medium, temperature, pressure, and corrosion level before selecting the materials for the valve body, disc, and seat.

2. Select the Correct Valve Size and Type

Valve selection should consider more than the pipeline diameter.

Flow rate, operating pressure, differential pressure, and application requirements all affect valve performance.

3. Install the Valve Correctly

Check flange alignment and pipeline conditions before installation. Make sure the disc has enough clearance and does not interfere with the pipeline or adjacent components.

Follow the manufacturer’s installation instructions, including any specified flow direction and mounting requirements.

4. Carry Out Regular Maintenance

Inspect the valve seat, disc, stem, bearings, and actuator regularly.

Pay attention to unusual noise, increased operating torque, and signs of leakage. Early inspections can help prevent more serious failures.

5. Work with a Reliable Valve Manufacturer

A reliable manufacturer should provide suitable material recommendations, product specifications, quality inspection, and technical support.

Before purchasing, ask for information about the sealing structure, material options, pressure rating, and applicable standards.

These details help buyers select a valve that matches their actual working conditions.

Conclusion

Double eccentric butterfly valves offer several advantages, including reduced friction during operation, improved sealing performance, and reliable service in many industrial applications.

However, problems such as internal leakage, seat wear, difficult operation, stem failure, and actuator malfunction can still occur.

Most of these problems are related to material selection, working conditions, installation quality, and maintenance practices.

Understanding the possible causes helps users solve problems more quickly and reduce unnecessary maintenance costs.

At WESDUN, we understand the importance of valve performance in industrial pipeline systems. We manufacture industrial valves for applications such as water supply, wastewater treatment, and other industrial projects.

If you are looking for a double eccentric butterfly valve for your project, contact our team. Share your working pressure, medium, temperature, and pipeline size. We can help you evaluate a suitable valve solution.

Share with:
Related News
Inquiry
Phone: +86 185 9581 2878
Email: contact@wesdunvalve.com
WhatsApp: +86 18595812878
Wesdun Fluid Technology Co.,LTD.
A reliable partner for your valve requirements